VIBRATION PLATE WAVE

vibration plate vawe recoverby
  1. Usage Instructions

  1. Maintenance and Storage

  2. Important Safety Information

  3. Bluetooth Music Streaming

  4. Product Specifications

  5. troobleshooting

  6. Product Description

  7. Control Panel Description

  8. Recommendations on How / When to use

1. Usage Instructions

  1. Do not use this product together with other medical devices.

  2. Do not use this product immediately after eating or after consuming alcohol.

  3. Keep children and pets away from the product. Do not insert fingers or any other objects into the gaps of the machine.

  4. This product is designed for use by one person at a time. Do not allow two or more people to use it simultaneously.

  5. Before use, check that your power supply voltage matches the requirements of the product.

  6. In the event of a power outage, or after extended periods without use, turn off the power switch and unplug the power cord.

  7. If water comes into contact with the product or the remote control, stop using it immediately.

  8. If any accessory is damaged or produces an unusual sound, stop use immediately.

  9. If you experience dizziness, numbness, pain, or any other discomfort during use, stop immediately.

  10. Do not use the product during a sudden power failure or during a thunderstorm.

  11. Maintain your balance while using the product to avoid falling.


2. Maintenance and Storage


  1. Store the machine in a dry, dust-free location.

  2. Do not store the unit near heaters or open flames. Do not expose it to direct sunlight for extended periods.

  3. Do not clean the machine with solvents such as thinner, volatile oils, or bleach.

  4. The pedal panel and outer casing may be cleaned with a damp cloth. Do not pour liquids onto the product, as this may cause a short circuit or other faults.

  5. Clean the remote control with a dry cloth only, to prevent malfunction.


3. Important Safety Information


  1. Use a properly grounded power socket. Avoid sharing the socket with other electrical equipment.

  2. If the power cable needs to be replaced, use a cable that includes a grounding function.

  3. After use, turn off the power supply and unplug the device.

  4. When unplugging, hold the plug itself and pull gently. Do not pull on the cable.

  5. Before use, check that the product is placed on a stable, level surface.

  6. The vibration speed can be adjusted by the user according to personal preference.

  7. Use indoors only, in a dry environment. Do not splash water on the machine, and do not place foreign objects on it.

  8. This product must not be used by children, pregnant women, elderly individuals, or people with physical disabilities.

  9. Do not allow children to play with or touch the unit while it is in use.

  10. If you feel unwell, stop using the product and consult a medical professional.

  11. If you have a pre-existing medical condition, consult a medical professional before use.

  12. If the machine behaves abnormally during use, stop immediately and contact your local dealer. Only qualified maintenance personnel should inspect or repair the unit — do not attempt to open or repair it yourself, as this may result in unexpected hazards.

  13. Any built-in fat or heart-rate measurement is not a medical-grade test and may not be fully accurate. This data is for reference purposes only.

  14. Exercise particular caution if you: have high blood pressure; use a pacemaker or other implanted electronic device; have a prosthetic limb or limited leg mobility; or have any condition affected by vibration or strenuous movement. Consult a doctor before use if any of these apply to you.

  15. For safety, turn off the power supply whenever the machine is not in use.


4. Bluetooth Music Streaming


To connect via Bluetooth:

  1. Open the Bluetooth pairing settings on your device.

  2. Locate a network named "Bluetooth," select it, and pair with your device.

  3. Once connected, music can be played and controlled from your device, and will play through the machine's speakers.

  4. Alternatively, use the remote control to adjust volume or play/pause your music.


5. Product Specifications




Specification




Details



Product Name




Vibrating Plate



Model




TD-331



Rated Voltage and Frequency




100–240V, 50/60Hz



Rated Power




150W



Rated Operating Time




10 minutes



Swing Amplitude




10 mm



Standards




GB4706.1-2005, GB4706.10-2008




Included Items





Host unit ×1, Power cable ×1, Instruction manual ×1, Remote control ×1


Technical parameters are subject to change without prior notice.


6. Troubleshooting




Issue



Possible Cause




Solution



Machine does not turn on



Power switch is not turned on




Turn on the power switch



Machine does not turn on



Poor contact between plug and socket




Check the outlet and ensure a secure connection



Remote control does not respond



Battery is missing or depleted




Insert the battery correctly, or replace it



Remote control does not respond



Remote is too far from the machine




Move closer to the machine and try again



Machine makes a clicking or knocking sound



This is a normal sound produced by the mechanical components




No action needed — this is normal



Indicator light stays on briefly after switching off



Residual electrical charge in the controller has not yet discharged




No action needed



Indicator light turns on without pressing the power button



Stepping on the plate can generate a small induction current in the motor




This is a normal phenomenon — no action needed




Power cord is damaged, or the unit emits an odor or smoke




Internal fault





Stop use immediately and contact a repair technician


6. Product Description

 

 
  1. Suction cups

  2. Switch

  3. Fuse

  4. Control panel

  5. Foot pads

  6. Atmosphere lights

  7. Pull the rope card hole



7. Control Panel Description

 

 
  1. Start or stop button.

  2. Mode. Can set 9 automatic modes (P1-P9) within 10 minutes, the speed can be automatically changed; Long press this key to turn the ambient light on/off.

  3. Display. Shows time, mode, burned calories (based on average).

  4. Adjustable speed / time button. Before the machine runs, press the button to set the time to 1 to 20 minutes (available only in manual mode); The default is 10 minutes. After the machine is running, the button sets the speed from 1-999 (available only in manual mode).

    ᚼ After a successful connection, the panel displays the Bluetooth flag.

8. Recommendations on How / When to use